The principle of operation of the diesel power plant

autokwix.com

Motor diesel power plant works on a completely different principle. In the process of compression, only air is in the cylinder, and the coefficient is about 15-25 units. Due to this pressure, the temperature inside reaches 700-900 ° C. Directly, in front of the top dead center of the piston, a portion of diesel fuel is sprayed into the cylinder. Small droplets instantly evaporate and form an air-fuel mixture, which immediately ignites when compressed.

Unlike a gasoline engine, the formation of a working charge inside the cylinder in a diesel unit occurs faster, for this reason, the mixture does not have time to become homogeneous throughout the volume.

The operation of diesel engine has the following features:

Diesel power plants are more durable. This is due to the design features of the units. A more powerful cylinder block, reliable piston group, reinforced crankshaft and cylinder head.

All this increases the service life of the mechanism. Diesel oil, possessing the properties of a lubricant, has a positive effect on the operation process.

During operation, the diesel engine is heated to higher temperatures. For this we need decent cooling system.

Determining which engine is better, one cannot ignore the fact that diesel engines suffer if it’s minus temperatures.

Diesel fuel thickens strongly in frost, without special additives, the process begins at −15 ° С.

To solve this problem, we need to refuel in time with a winter type of fuel, with a lower freezing threshold, otherwise there will be different problems with the fuel pump and filter, which are designed to work with a fluid of a certain viscosity.

Diesel installation requires electricity only to start the engine, then it works autonomously.

As the long-term practice of operating power plants shows that diesel engines have a great resource, and the maintenance process consists of the timely replacement of oil, filters and fuel (according to the season).

Comments are closed.